Radiant Surgident

GC G-Aenial Universal Flo is a partner product to G-ænial Universal Flo. It is indicated for use in small cavities, serving as a cavity liner. This highly radiopaque and flowable composite enables easy placement and flow during handling preparation.

• High flowability for easy placement; there are no air voids during placement
• Newly designed syringe and tip minimizes waste, allows excellent visibility, and easier use
• Highly recommended as a base, liner, pit and fissure sealant
• Highly recommended for small cavities and minimum intervention dentistry
• Higher radiopacity
• bis-GMA free
• Operates like a low-flow flowable, and performs like a restorative
• New, innovative delivery system
• Easy access, handling and placement
• Highly thixotropic, with an excellent flow
• Recommended for Class I, II, III, IV and V Restorations
• Higher strength than the leading flowables and conventional composites
• Higher wear resistance than the leading flowables and conventional composites
• Higher gloss retention than the leading flowables and conventional composites
• Contains 16 shades in three opacities
• bis-GMA free

• A Strontium-based Glass Ionomer:All GC Gold Label Glass Ionomer contains strontium glass.The strontium glass provides good radiopacity and snapset characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluoroapatite to affect internal remineralization within the tooth structure.
• Surface Strengthening Effect: Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer&surface achieving a surface strengthening effect. All GC& Gold Label Glass Ionomer strengthens over time in saliva.
• A Consistent Predictable Seal: All GC Gold Label Glass Ionomer will display a glossy& surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The& subsequent movement of ions between dentin, enamel and& GC Glass Ionomer creates an ion exchange zone which chemically fuses them together. The resulting seal is& consistent, predictable and long lasting.

INDICATIONS :

• Cementation of metal or porcelain fused to metal crowns, bridges, inlays
• Cementation of stainless steel crowns or orthodontic appliances retained with stainless steel crowns
• Cementation of orthodontic bands
• Base or liner

ADVANTAGES:

• Allows minimal cavity preparation
• Less stress on margins and marginal seal
• Protects against secondary caries
• Promotes internal remineralization and surface strengthening
• Easy post-operative diagnosis
• Easier mixing and sharper setting makes it so easy to use
• Final finish may be completed under water 15 minutes from start of mix
• Matches to natural tooth structure
• Good colour match to tooth structure
• More durable, longer lasting restorations
• Assurance of successful restorations

Gc Fujicem 2 Dispenser is a second-generation, resin modified glass ionomer luting cement. Following ten years of clinical success with GC FujiCEM, this product is powered by F2 Flex Fuse Technology, which incorporates new high-elastic crosslinking monomers with a modified filler-surface treatment that increases strength properties. The F2 Flex Fuse Technology helps with improving indirect restorations with increased strength, high fluoride release, low film thickness and excellent marginal integrity. Indicated for a broad array of indirect restorations including all types of metal-, resin-, alumina- and zirconia-based inlays, onlays, crowns and bridges, GC FujiCEM 2 delivers superior bond strength which allows extra time for completing more restorations. The automix paste pak dispensing system ensures a consistent mix every time, allowing you to place every restoration with the confidence that it will last. Fast, easy to use and stronger than ever, the new GC FujiCEM 2 from GC America is the ideal luting cement for all indirect restorations.

• Fuji IX GP EXTRA allows final finishing in only 2 1/2 minutes from initial mix.
• The faster final set saves valuable chair time which provides improved stability against water, an important feature in challenging oral environments.
• A unique SmartGlass filler offering improved translucency for a more aaesthetic restoration.
• INDICATIONS
• Class I and small Class II restorations in non-load bearing areas.
• Class I and Class II restorations in deciduous teeth.
• Transitional restorations.
• Base / Core build-ups.

Resin Reinforced Glass Ionomer Luting Cement

GC FujiCEM is the world’s first glass ionomer luting cement mixed from pastes. The specially developed Paste Pak System is designed to simplify dispensing and offer greater consistency in cementation helping to ensure a perfect result every time.

Indications:

• Cementing all types of metal, porcelain fused to metal, and resin crowns, inlays, onlays, and bridges
• Cementing porcelain inlays
• As a base or liner

• Cartridge delivery always dispenses the correct ratios
• Minimizes cement waste
• Flexibility in the amount of cement that can be dispensed
• Easier mixing in only 10 secs.
• No air bubbles
• Sufficient working time
• Minimal film thickness of only 3 µ.
• Guaranteed adhesive strength
• Effective fluoride release
• Optimal clinical performance

A Strontium-based Glass Ionomer:

All GC Gold Label Glass Ionomer contains strontium glass. The strontium glass provides good radiopacity and snap set characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluorapatite to affect internal remineralization within the tooth structure.

Surface Strengthening Effect:

Research has shown that a strontium-based glass ionomer placed in a calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer surface achieving a surface-strengthening effect. All GC Gold Label Glass Ionomer strengthens over time in saliva.

A Consistent Predictable Seal:

All GC Gold Label Glass Ionomers will display a glossy surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The subsequent movement of ions between dentin, enamel, and GC Glass Ionomer creates an ion exchange zone that chemically fuses them together. The resulting seal is consistent, predictable, and long-lasting.

INDICATIONS:

• Restoration of Class III and V cavities
• Erosion lesions
• Primary teeth
• Base/core build-ups

• A Strontium-based Glass Ionomer:All GC Gold Label Glass Ionomer contains strontium glass.The strontium glass provides good radiopacity and snapset characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluoroapatite to affect internal remineralization within the tooth structure.
• Surface Strengthening Effect: Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer&surface achieving a surface strengthening effect. All GC& Gold Label Glass Ionomer strengthens over time in saliva.
• A Consistent Predictable Seal: All GC Gold Label Glass Ionomer will display a glossy& surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The& subsequent movement of ions between dentin, enamel and& GC Glass Ionomer creates an ion exchange zone which chemically fuses them together. The resulting seal is& consistent, predictable and long lasting.

INDICATIONS :

• Cementation of metal or porcelain fused to metal crowns, bridges, inlays
• Cementation of stainless steel crowns or orthodontic appliances retained with stainless steel crowns
• Cementation of orthodontic bands
• Base or liner

ADVANTAGES:

• Allows minimal cavity preparation
• Less stress on margins and marginal seal
• Protects against secondary caries
• Promotes internal remineralization and surface strengthening
• Easy post-operative diagnosis
• Easier mixing and sharper setting makes it so easy to use
• Final finish may be completed under water 15 minutes from start of mix
• Matches to natural tooth structure
• Good colour match to tooth structure
• More durable, longer lasting restorations
• Assurance of successful restorations

GC Fuji VII evolutionary glass ionomer sealant and surface protectant. It is fantastic at keeping young patients teeth cavity-free. There is no isolation or bonding agent required. It works in a moist field. With this product, you never have to worry about sealing over immature enamel or non-cavitated lesions. The self-bonding, high fluoride releasing GC Fuji VII creates a strong, acid-resistant fused layer.

• Seals and protects tooth enamel
• Six times more fluoride than any other sealant
• Releases fluoride for up to 24 months to help prevent decay from acid and bacteria
• uji VII White is for fully erupted teeth; Fuji VII Pink offers a visual indicator that is ideal for newly erupted molars

•  This unique restorative system for all age groups will impress you on all levels.
•  Compared to other restorative options, EQUIA Forte gives a substantial time advantage.
•  The impressive aesthetics widen your posterior restorative options to fulfil your patient??s expectations.
•  Based on the EQUIA system, clinically proven over several years, EQUIA Forte offers a great alternative for your daily routine.

GC Reline Soft Introduction Kit for long lasting relining of dentures, especially in cases where supportive tissue material is missing. GC Reline Extra Soft: Tissue toning material based on A-silicone to overcome pressure point problems frequently seen with edentulous patients.GC Reline Soft Introduction Kit

• No temperature increase and no smel
• Cartridge delivery system
•  Excellent shock absorber
•  Good flow under pressure
•  No temperature increase

Two component material for wound dressing, to cover stitches or to stabilize loose teeth.

How to use

• Regular Set: ready for use within 3 min., setting time 30 min.

Indications:

• G-aenial features a unique composition which provides an excellent chameleon effect and integration – in most cases with only one shade.

To Replace enamel, G-aenial features an age-related shade system:

• Junior Enamel (JE) for young patients
• Adult Enamel (AE) for adult patients
• Senior Enamel (SE) for senior patients

Advantages:

• G-aenial Anterior will reinforce your aesthetic skills and ability to match every restoration with nature.
• Suited to all application techniques: from mono-shade beauty to a thousand aesthetics possibilities using multi-shade layering
• Smooth, non-sticky viscosity that can even be handled with a brush
• Stress-free work in multi-layer restorations: working time of around 4 min.
• Aesthetic & radiopaque: unique patented High-Density Radiopaque (HDR) filler technology for easy traceability through X-rays
• G-aenial Posterior is formulated to provide both strength and low shrinkage stress to help reducing the risk of long term failure.
• Excellent aesthetics with just a single shade
• Adequate radiopacity of 252% Al facilitates the follow-up
• Non-sticky packable viscosity for better control contouring and building anatomical forms.

G-CEM LinkAce, the next generation self-adhesive resin cement from GC, builds on this expertise with new high technology including an innovative initiator system for fast and safe polymerization. The result is a material that offers exceptional physical properties and bond strength while keeping the same ease-of-use and lack of post-operative sensitivity seen with G-CEM Automix.

• Cementation of all types of all ceramic, resin and metal-based inlays, onlays, crowns and bridges.
• Cementation of metal, ceramic, fibre posts, and cast post and cores.

• offers unsurpassed wear resistance due to its small and homogeneously distributed filler particles.
• provides for exceptionally reliable self-curing under all materials.
• contains unique phosphate monomers that chemically bond to Zirconia, for a strong and stable bond.

G-Premio Bond One Component Light Cured Adhesive is a one-bottle universal bonding agent compatible with all etching modes.

• It can be used for direct bonding, but also for repair & hypersensitivity treatment.
• Moreover, GC wants to offer this ease of use and versatility without any impact on the quality of the bond.
• G-Premio BOND offers the advantages of a universal, but with a top performance in all situations thanks to a unique combination of three functional monomers (4-MET, MDP, MDTP).

G-Bond One-Component Self-Etching Light-Cured Adhesive is an easy-to-use self-etching light-cured adhesive. It utilises both chemical adhesion and micro-mechanical retention principles to form a unique and stable nano interaction zone (NIZ) with the dentin. At the same time, it also offers a reliable adhesion to enamel. Several clinical studies (including one with 9-year follow-up) have proven its extremely good performance in time.

Other Details:

• Whether you have to restore a curved, a large or a simple straight root canal, GC offers you a perfect and adapted solution to simplify and strengthen your core build-up restorations.
• GC everStickPOST is a soft, flexible and unpolymerised glass fibre post which can be individually adapted to the shape of the root canal.

Indications:

• GC everStickPOST is especially suited to fit the morphology of atypical canals such as curved, oval as well as very large root canals.

Advantages:

• Minimally invasive preparation reducing risks of fracture since the posts are fully adaptable to the morphology of the canal before light-curing
• High flexural strength after light-curing and elasticity very similar to dentin
• Strong bond to the luting composite thanks to the patented IPN structure offering both chemical and micro-mechanical adhesion

G-CEM Link Force Starter Kit is a dual cure adhesive resin cement for cementation of all types of indirect restorations.

• Strong, esthetic, universal solution for all adhesive cementations
• The ideal cement to use with all milling blocks, including CERASMART Universal
• Four shades available in both cement and try-in paste: A2, Bleach, Opaque and Translucent
• Excellent color stability and easy clean-up
• G-CEM LinkForce Cement is available as a refill, or part of a system that includes multiple products:
• G-CEM LinkForce Resin Cement
• G-CEM Try-In Paste
• G-Premio BOND
• G-Premio BOND Dual Cure Activator (DCA)
• G-Multi PRIMER